Question by brrichmond2002: Please help. I have a acu-rite wireless thermometer and I can’t seem to get the inside sensor to find outside?
It worked until I replaced the batteries now I can not get the inside to acknowledge the outside sensor. there are reset buttons on both pieces, but nothing seems to work. I lost my instructions. It is model #75321A1. Please help./
Best answer:
Answer by DAVID A I don’t know this specific unit, but my Oregon Scientific unit requires me to register the remote by having it rather close to the base unit when I do a reset. If you haven’t tried this, then I suggest you do so. Also, my units seem to be very sensitive to location. If you’ve moved either the base or remote, they may not be able to communicate; try moving them closer together to see if they work together.
Question by justin_I: Indoor Outdoor Thermometer – where do I place the sensor?
I have an Accurite thermometer. It has an outdoor sensor on the end of a wire that is sticky.
Do I stick the sensor to the interior of my window, or put it on the outside of the window? I put it outside, right? The “manual” doesn’t say.
Thanks!
Best answer:
Answer by suellenh The sensor goes outside the window but it mustn’t ever be in direct sunlight. We’ve had this type in the past but currently have two wireless thermometers – I always check the readout in my close before dressing for the day.
Question by jmt454: Where would I find the outside temperature sensor for the thermometer on a 2000 Chevy Blazer?
The thermometer that tells the outside temperature is WAY off
Best answer:
Answer by Mr. Badwrench It’s behind the grill, in front of the radiator and A/C condenser.
Video 1 of 4 alan-parekh.com This project will demonstrate how to make a temperature controlled cooling fan for an external hard drive. An LM35 temperature sensor is used to sense the temperature and a PIC 12F675 is used to modulate the fan speed. Video Rating: 5 / 5
Convert temperature in degrees Celsius to degrees Fahrenheit using this method. Video Rating: 4 / 5
Question by Bob S: How do you install a car thermometer SENSOR to the front bumper?
97 Camry and I’m trying to figure out how to wire the sensor to the front bumper for almost accurate readings.
Do I drill a firewall or is there an easy way to this?
Are you fucking retarded you troll?
Best answer:
Answer by awful p Go to home depot and get on of those big a$$ out door thermostats and hang it with a chain from the hood. Then change the horn to say FLAVA FLAV!! reapetedly.
Buy it here: ow.ly The perfect watch for any outdoor enthusiast. Casio Pathfinder digital watch Resin case Adjustable titanium bracelet Solar triple sensor(Altimeter, barometer, thermometer) Compass & 5 alarms Mineral crystal Case measures approx. 2″ in diameter Deployment clasp with a safety clasp Chinese digital movement Water resistant to 100 meters 1 year limited warranty from the manufacturer Video Rating: 5 / 5
A temperature sensor circuit calibrated to activate and deactivate a Schmitt trigger at 18-22 degrees; triggering the solid state relay at high logic, that is connected to a portable heater. And yeah, I was hung over, and I look awful…
Watch and learn how a flexible temperature sensor can ease installation and save costs! This is a Temperature Sensor technology demo featuring industry analyst Peter Welander. The demo features the advantages of flexible Thermocouple and RTD sensors. The specific product featured is the WORM Flexible Temperature Sensor from Moore Industries. Video Rating: 5 / 5
Describes the operation and testing of the EGR temperature sensor. This thermistor device is a direct EGR feedback sensor. It works somewhat similar to the ECT (coolant sensor) and as EGR flow goes up, its resistance goes down. See how it works and how to test it with our concise video training for the EGR temperature sensor. Video Rating: 5 / 5
